Polypropylene Wet Air Scrubber Gas Purification Tower D800*3500mm for Chemical Plant

PP gas purification tower absorption column for waste gas

First of all

 1.This type wet scrubber/purification tower is usually used to eliminate dust particles and part of the waste gas easy to be dissolved in water, then into the next equipment for retreatment .

2. Quick view of specifications: 

    Draft fan :  power 3.0 Kw ; weight 50Kg 

    Pump: power 0.75 Kw; weight 18Kg 

    Wet scrubber:

    airflow: 2160~3150 M3/H  ; size: DN800*3500 mm  ; Gas inlet and outlet diameter: 400 mm ; weight 200Kg

    We deeply customize and provide solutions and products               according to your working conditions and problems  ! 

    The exhaust gas is introduced into the purification tower by the wind pipe. Through the packing layer, the exhaust gas and the absorption liquid are fully exposed to the absorption and neutralization reaction of the gas-liquid two phase. After the exhaust gas is purified, the fan is discharged into the atmosphere by the dehydration of the mist removal plate and the mist eliminator. The absorption liquid is pressurized by the pump at the bottom of the tower and then sprayed down at the top of the tower. Finally, it is recycled to the bottom of the tower for recycling. The purified acid mist exhaust gas is lower than the national emission standard.

Application pictures

Adventages

1.The efficiency of dust removal and desulfurization is high and the efficiency of desulfurization can reach 85% when using alkaline washing water.
2.The equipment is small and easy to install.
3.Low water consumption and low power consumption.
4.The equipment is reliable, simple and convenient to maintain.

Specification sheet